FS32K146HFT0VLHT ARM Manawahiko MCU S32K146 M4F Kohiko 1M RAM 128KB

• Nga ahuatanga whakahaere
– Awhe ngaohiko: 2.7 V ki te 5.5 V
– Awhe pāmahana ambient: -40 °C ki 105 °C hokiAratau HSRUN, -40 °C ki te 150 °C mo te aratau RUN

• Arm™ Cortex-M4F/M0+ matua, PTM moka-32
- Tautoko ake ki te 112 MHz auau (ahua HSRUN)me te 1.25 Dhrystone MIPS ia MHz
– Arm Core i runga i te Armv7 Architecture meThumb®-2 ISA
– Tukatuka Tohu Mamati Whakauru (DSP)
– Ka taea te whirihora i te Kohanga Vectored Interrupt Controller(NVIC)
– Waeine Ira Maangi Takitahi (FPU)

• Nga atanga karaka
– 4 – 40 MHz tere oscillator waho (SOSC) ki rungaki te 50 MHz DC karaka whakauru tapawha o wahoaratau karaka o waho
– 48 MHz Tere a roto RC oscillator (FIRC)
– 8 MHz Puturi Roto oscillator RC (SIRC)
– 128 kHz Hakaiti Hiko Oscillator (LPO)
– Tae atu ki te 112 MHz (HSRUN) Maukati PūnahaPorowhita (SPLL)
– Tae atu ki te 20 MHz TCLK me te 25 MHz SWD_CLK
– 32 kHz Kaitatau Wā Tuturu karaka waho(RTC_CLKIN)

• Whakahaere mana
– He iti-mana Arm Cortex-M4F/M0+ matua kitino pai te kaha
– Mana Whakahaere Mana (PMC) me te mahaaratau mana: HSRUN, RUN, STOP, VLPR, meVLPS. Tuhipoka: CSEc (Haumarutanga), EEPROM ranei te tuhi/ūkui ka puta nga haki hapa i te aratau HSRUN (112MHz) na te mea kaore e whakaaetia tenei keehimahia i te wa kotahi. Ka tika te taputapuhuri ki te aratau RUN (80 MHz) ki te mahi CSEc(Haumarutanga) EEPROM ranei ka tuhi/te whakakore.
– Te karaka karaka me te iti o te mana whakahaere e tautokohia anaperipheral motuhake.

• Atanga mahara me te mahara
– Tae atu ki te 2 MB te mahara flash kaupapa me te ECC
– 64 KB FlexNVM mo te mahara kohiko raraunga me te ECCme te tauira EEPROM. Tuhipoka: CSEc (Haumarutanga) raneiKo te tuhi/te whakakore a EEPROM ka puta nga haki hapaAratau HSRUN (112 MHz) na te mea ko tenei take whakamahikaore e whakaaetia kia mahia i te wa kotahi. Ko te taputapume huri ki te aratau RUN (80 MHz) kimahia CSEc (Haumarutanga) ranei EEPROM tuhi / ūkui.
– Tae atu ki te 256 KB SRAM me te ECC
– Tae atu ki te 4 KB o FlexRAM mo te whakamahi hei SRAM raneiEEPROM tauira
– Tae atu ki te 4 KB Code keteroki hei whakaiti i te mahite awenga o nga waahi uru mahara
– QuadSPI me te tautoko HyperBus™

• Waitohu whakaranu
– Tae atu ki te rua 12-bit Analog-to-Digital Converter(ADC) ki runga ki te 32 hongere tairitenga whakaurunga iakōwae
– Kotahi Whakataurite Analog (CMP) me te 8-bit o rotoMamati ki te Ariterite (DAC)

• Taumahinga patuiro
– Waea Rangatū JTAG Debug Tauranga (SWJ-DP) whakakotahi
– Ira Matataki me te Aroturuki (DWT)
– Pūtau Tohu Taonga Taputapu (ITM)
– Wae Atanga Tauranga Whakamatau (TPIU)
– Waehe Patch Flash me Breakpoint (FPB).

• Atanga tangata-miihini (HMI)
- Tae atu ki te 156 nga titi GPIO me nga mahi aukati
– Haukoti Kore-Maskable (NMI)

• Nga atanga whakawhitiwhiti
– Tae atu ki te toru nga waahanga Whakawhiwhia Tukutahi-a-Ao Maama Whakawhiti (LPUART/LIN) me te tautoko DMAme te iti o te waatea o te mana
– Tae atu ki te toru nga waahanga Atanga Rangarangi Rangarangi Hiko (LPSPI) me te tautoko DMA me te iti o te mana kaha
– Tae atu ki te rua nga waahanga Whakawhiti Whakakotahi-Whakakotahi Hiko Hiko (LPI2C) me te tautoko DMA me te iti o te mana kaha.
– E toru nga waahanga FlexCAN (me te tautoko CAN-FD)
– FlexIO kōwae mo te whai i nga kawa korero me nga peripheral (UART, I2C, SPI, I2S, LIN, PWM, etc).
– Tae atu ki te kotahi 10/100Mbps Itarangi me te tautoko IEEE1588 me nga waahanga Atanga Ororongo Tukutahi (SAI) e rua.

• Haumaru me te Haumaru
– Ka whakatinanahia e te Miihini Ratonga Kriptographic (CSEc) he huinga matawhānui o nga mahi tuhi korero i whakaahuatia i roto i teSHE (Torohanga Taputapu Haumaru) Whakatakotoranga Mahi. Tuhipoka: Ko te CSEc (Haumarutanga), ko EEPROM ranei te tuhi / te whakakore i te hiahia
tohu haki hapa i roto i te aratau HSRUN (112 MHz) na te mea kaore tenei keehi e whakaaetia kia mahia i te wa kotahi. Ko teme huri te taputapu ki te aratau RUN (80 MHz) ki te whakahaere i te CSEc (Haumaru) ka tuhi/te whakakore ranei a EEPROM.
– 128-bit Tau Tautuhi Motuhake (ID).
– Waehere Whakatika Hapa (ECC) i runga i nga mahara flash me te SRAM
– Waehere Tiaki Maharahara (MPU Pūnaha)
– Cyclic Redundancy Check (CRC) kōwae
– Tiaki o roto (WDOG)
– Kōwae aroturuki Watchdog waho (EWM).

• Te wa me te whakahaere
– Tae atu ki te waru nga waahanga 16-bit FlexTimers (FTM) motuhake, e tuku ana ki te 64 nga waahana paerewa (IC/OC/PWM)
– Kotahi moka 16-bit Maama Hiko Hiko (LPTMR) me te mana oho ngawari
– E rua nga Poraka Whakaroa Whakataaro (PDB) me te punaha keu ngawari
– Kotahi moka 32-bit Te Matama Whakararu Hiko (LPIT) me nga hongere 4
– 32-bit Kaitatau Wā Tuturu (RTC)

• Mōkī
– 32-titi QFN, 48-titi LQFP, 64-titi LQFP, 100-titi LQFP, 100-titi MAPBGA, 144-titi LQFP, 176-titi LQFP ketekōwhiringa

• 16 hongere DMA ki runga ki te 63 puna tono whakamahi DMAMUX