FS32K116LFT0VLFT ARM Microcontrollers – MCU S32K116 32-bit MCU, ARM Cortex-M0+

• Nga ahuatanga whakahaere

– Awhe ngaohiko: 2.7 V ki te 5.5 V

– Awhe pāmahana ambient: -40 °C ki te 105 °C mo te aratau HSRUN, -40 °C ki te 150 °C mo te aratau RUN

• Arm™ Cortex-M4F/M0+ matua, PTM moka-32

– Tautoko ake ki te 112 MHz auau (HSRUN aratau) me te 1.25 Dhrystone MIPS ia MHz

– Arm Core i runga i te Armv7 Architecture me te Thumb®-2 ISA

– Tukatuka Tohu Mamati Whakauru (DSP)

– Ka taea te whirihora i te Kohanga Whakararuraru Ataahua (NVIC)

– Waeine Ira Maangi Takitahi (FPU)

• Nga atanga karaka

– 4 – 40 MHz tere oscillator waho (SOSC) tae atu ki te 50 MHz DC karaka whakauru tapawha o waho ki te aratau karaka o waho

– 48 MHz Tere a roto RC oscillator (FIRC)

– 8 MHz Puturi Roto oscillator RC (SIRC)

– 128 kHz Hakaiti Hiko Oscillator (LPO)

– Tae atu ki te 112 MHz (HSRUN) Roopu Maukati Pūnaha (SPLL)

– Tae atu ki te 20 MHz TCLK me te 25 MHz SWD_CLK

– 32 kHz Kaitatau Wa Tuturu karaka waho (RTC_CLKIN)

• Whakahaere mana

– He iti-mana Arm Cortex-M4F/M0+ matua me te tino pai o te kaha

– Mana Whakahaere Mana (PMC) me nga momo mana maha: HSRUN, RUN, STOP, VLPR, me VLPS. Tuhipoka: Ko te CSEc (Haumarutanga), ko te EEPROM te tuhi/te whakakore ka puta nga haki hapa i roto i te aratau HSRUN (112 MHz) na te mea kaore tenei keehi e whakaaetia kia mahia i te wa kotahi. Me huri te taputapu ki te aratau RUN (80 MHz) ki te mahi CSEc (Haumarutanga), EEPROM ranei te tuhi/te whakakore.

– Ko te karaka karaka me te iti o te mana whakahaere e tautokohia ana i runga i nga taputapu motuhake.

• Atanga mahara me te mahara

– Tae atu ki te 2 MB te mahara flash kaupapa me te ECC

– 64 KB FlexNVM mo te mahara kohiko raraunga me te ECC me te EEPROM tauira. Kia mahara: Ko te CSEc (Haumarutanga), ko te EEPROM ranei te tuhi/te whakakore ka puta nga haki hapa i roto i te aratau HSRUN (112 MHz) na te mea kaore tenei keehi e whakaaetia kia mahia i te wa kotahi. Me huri te taputapu ki te aratau RUN (80 MHz) ki te mahi CSEc (Haumarutanga), EEPROM ranei te tuhi/te whakakore.

– Tae atu ki te 256 KB SRAM me te ECC

- Tae atu ki te 4 KB o FlexRAM hei whakamahi hei tauira SRAM, EEPROM ranei

– Tae atu ki te 4 KB Waehere keteroki hei whakaiti i te paanga o te mahi o nga waahi uru mahara

– QuadSPI me te tautoko HyperBus™

• Waitohu whakaranu

– Tae atu ki te rua 12-bit Analog-to-Digital Converter (ADC) tae atu ki te 32 hongere whakaurunga tairitenga mo ia kōwae

– Kotahi te Whakataurite Analog (CMP) me te Mamati 8-bit o roto ki te Kaitahuri Analog (DAC)

• Taumahinga patuiro

– Waea Rangatū JTAG Debug Tauranga (SWJ-DP) whakakotahi

– Ira Matataki me te Aroturuki (DWT)

– Pūtau Tohu Taonga Taputapu (ITM)

– Wae Atanga Tauranga Whakamatau (TPIU)

– Waehe Patch Flash me Breakpoint (FPB).

• Atanga tangata-miihini (HMI)

- Tae atu ki te 156 nga titi GPIO me nga mahi aukati

– Haukoti Kore-Maskable (NMI)

• Nga atanga whakawhitiwhiti

– Tae atu ki te toru nga waahanga Whakawhiwhia Tukutahi-a-Ao Maama Whakawhiti (LPUART/LIN) me te tautoko DMA me te iti o te mana kaha.

– Tae atu ki te toru nga waahanga Atanga Rangarangi Rangarangi Hiko (LPSPI) me te tautoko DMA me te iti o te mana kaha

– Tae atu ki te rua nga waahanga Whakawhiti Whakakotahi-Whakakotahi Hiko Hiko (LPI2C) me te tautoko DMA me te iti o te mana kaha.

– E toru nga waahanga FlexCAN (me te tautoko CAN-FD)

– FlexIO kōwae mo te whai i nga kawa korero me nga peripheral (UART, I2C, SPI, I2S, LIN, PWM, etc).

– Tae atu ki te kotahi 10/100Mbps Itarangi me te tautoko IEEE1588 me nga waahanga Atanga Ororongo Tukutahi (SAI) e rua.

• Haumaru me te Haumaru

– Ka whakatinanahia e te Miihini Ratonga Kiriatarangi (CSEc) he huinga matawhānui o nga mahi whakahiato e whakaahuatia ana i roto i te SHE (Secure Hardware Extension) Taumahi Taumahi. Kia mahara: Ko te CSEc (Haumarutanga), ko te EEPROM ranei te tuhi/te whakakore ka puta nga haki hapa i roto i te aratau HSRUN (112 MHz) na te mea kaore tenei keehi e whakaaetia kia mahia i te wa kotahi. Me huri te taputapu ki te aratau RUN (80 MHz) ki te mahi CSEc (Haumarutanga), EEPROM ranei te tuhi/te whakakore.

– 128-bit Tau Tautuhi Motuhake (ID).

– Waehere Whakatika Hapa (ECC) i runga i nga mahara flash me te SRAM

– Waehere Tiaki Maharahara (MPU Pūnaha)

– Cyclic Redundancy Check (CRC) kōwae

– Tiaki o roto (WDOG)

– Kōwae aroturuki Watchdog waho (EWM).

• Te wa me te whakahaere

– Tae atu ki te waru nga waahanga 16-bit FlexTimers (FTM) motuhake, e tuku ana ki te 64 nga waahana paerewa (IC/OC/PWM)

– Kotahi moka 16-bit Maama Hiko Hiko (LPTMR) me te mana oho ngawari

– E rua nga Poraka Whakaroa Whakataaro (PDB) me te punaha keu ngawari

– Kotahi moka 32-bit Te Matama Whakararu Hiko (LPIT) me nga hongere 4

– 32-bit Kaitatau Wā Tuturu (RTC)

• Mōkī

– 32-titi QFN, 48-titi LQFP, 64-titi LQFP, 100-titi LQFP, 100-titi MAPBGA, 144-titi LQFP, 176-titi LQFP kōwhiringa mōkihi

• 16 hongere DMA ki runga ki te 63 puna tono whakamahi DMAMUX